SmartAVI CAT5 UXGA, Stereo Audio Extender over Cat5 1000ft, VCA-100S
Shop for SmartAVI VCA-100S, which is very inexpensive and easy to install. Use a single CAT5 to broadcast high resolution UXGA and stereo audio 1000ft away at most affordable price in the market.
- Uses easy to install, inexpensive CAT5.
- Output reaches up to 1,000 feet.
- Supports high resolution clear video up to 1900x1200.
- 300 MHz Bandwidth.
- Sends high-resolution VGA signals and stereo audio up to 1000 feet.
- Compatible with VGA, XGA, Sun, MAC and SGI Signals.
- Sync Format / Polarity Preservation.
- High ground loop immunity.
- Built-in lightning, power surge and transient protection.
- Remote Units come with Buffered Outputs.
- Designated trimmer in the remote unit to compensate for cable length.
- Metal Case Enclosure.
- External power supply.
- Bandwidth: 400MHz
- Analog signal level: 1Volt
- Impedance: 75 ohms
- Connector: High density HD15
- Format: VGA/SVGA/XGA/UXGA/RGBHV/RGsB
- Sync: TTL horizontal SyncRange: 15 to 130
KHzVertical Sync Range: 30 to 120 Hz
- Bandwidth: 20KHz
- Signal level: 0dB
- Impedance: 10K ohms
- Connector: 3.5mm jack socket
- Type: Cat5 UTP EIA 568A
- Connector: RJ45
- Requirements: 5V DC @500mA
- Connector: 5 x 2.1mm DC jack